700 Rotary Flow Meter -
Performance | Return to TCS 700 |
| The 700 Rotary Flow Meter holds the
National Type Evaluation Program (NTEP) Certificate of Conformance meeting the
National Institute of Standards and Technology (NIST) Handbook 44 requirements
for the resale of petroleum products. The 700 Rotary Flow Meter combines
outstanding accuracy with superior performance. Due to the smooth flowing
characteristics of this meter design, the minimum seal area provides a
sustained accuracy over a wide range of flow, regardless of pressure
fluctuations. ACCURACY
5:1 = ± 0.1%
NOTE: Accuracy is obtainable when operating conditions are constant. This information is based on 700SP/SPA meters and Veeder Root mechanical registration, using 1 cPs testing fluid. Linear accuracy can improve using electronic registration. |
CAPACITY
| Meter | Types Available | Flange Connection* | Max. Capacity GPM (LPM)** | Working Pressure | Working Temperature*** |
| 700-15 | SP, SPA, IP & IC | 1½" NPT Flange; 2" Optional | 60 GPM (227 LPM) |
150 PSI (10.5 BAR) |
-40°F to 160°F (-40°C to 71°C) |
| 700-20 | SP, SPA, IP, IC, AF & SS | 2" NPT Flange; 1½" Optional | 100 GPM (380 LPM) |
150 PSI (10.5 BAR) |
-40°F to 160°F (-40°C to 71°C) |
| 700-25 | SPA | 2" NPT Flange | 150 GPM (567 LPM) |
150 PSI (10.5 BAR) |
-40°F to 160°F (-40°C to 71°C) |
| 700-30 | SP, SPA, IP & IC | 3" NPT Flange; 2" Optional | 200 GPM (760 LPM) |
150 PSI (10.5 BAR) |
-40°F to 160°F (-40°C to 71°C) |
| 700-35 | SPA | 3" NPT Flange | 300 GPM (1135 LPM) |
150 PSI (10.5 BAR) |
-40°F to 160°F (-40°C to 71°C) |
| 700-40 | SP, SPA, IP & IC | 4" NPT Flange; 3" Optional | 500 GPM (1,893 LPM) |
150 PSI (10.5 BAR) |
-40°F to 160°F (-40°C to 71°C) |
| 700-45 + | SPA | 4" NPT Flange | 600 GPM (2271 LPM) | 150 PSI (10.5 BAR) |
-40°F to 160°F (-40°C to 71°C) |
+ NIST Weights & Measures are pending for the 700-45 SPA flow meter
* Flanged NPT is standard; BSPT, Slip Weld, ANSI and other flanges are available upon request
** Unit of Measure is standard in U.S. Gallons; Litrers, Pounds, etc. available upon request
*** Higher working temperatures can be achieved at reduced pressure (Consult factory for more information)
Duplication of any part can only be made after having received the express permission by Globetech and/or its officers.